• The market's 1st true air slide hammer puller, delivering up to 1200 hammer blows per minute with the pull of a trigger
• Compares to a 3.5-4.5lb manual slide hammer on hard joints (rusted, solid and stuck parts) and 4.5-6lb on non-hard joints (dent pulling, rear axle bearings, etc.)
• Common 5/8”-18 threads for use on the majority of slide hammer attachments to pull everything from pilot bearings to hubs and collision repair
• Both the extension rod and spindle threads match for use with either more reach or as a stubby slide hammer, working where traditional tools do not have enough clearance
• Lever throttle allows for adjustment of force and speed, allowing you to stay focused on the workpiece and dial in the required power while the tool does the work
• Power scales with inlet pressure and volume, 90-120psi recommended.
WARNING: This product can expose you to chemicals including Gasoline engine exhaust (condensates/extracts), which is known to the State of California to cause cancer. For more information go to
www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including Ethylene glycol (ingested), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
(California Prop 65)